ProductsDM Fax Server Print-2-Image |
 |
SolutionsFax Server & Fax Software Email Fax Production Fax and e-Document Delivery Fax over IP Image Conversion Software |
|
Fax and ComplianceHIPAA Sarbanes-Oxley |
Trial SoftwareDM Fax Server Print-2-Image |
|
Documents & ResourcesDatasheets Whitepapers Documentation |
DM Fax Server System Requirements
Supported Operating Systems
DM Fax Server can be installed on a server machine running the following operating systems.
Windows Server 2008
- Windows Server 2008 Enterprise Edition (32-bit and 64-bit)
- Windows Server 2008 Standard Edition (32-bit and 64-bit)
- Windows Server 2008 Cluster (32-bit and 64-bit)
Windows Server 2003
- Windows Server 2003 Enterprise Edition (32-bit and 64-bit)
- Windows Server 2003 Standard Edition (32-bit and 64-bit)
- Windows Server 2003 Cluster (32-bit and 64-bit)
Windows Server 2000
- Windows 2000 Advanced Server
- Windows 2000 Server
Recommended System Requirements
- Intel Pentium 4 (or equivalent) 2 GHz Processor
- 1 GB RAM
- 40 GB Hard Disk
- Network Interface Card (NIC)
- VGA adapter and monitor
- CD-ROM Drive
- Keyboard
Minimum System Requirements
- Intel Pentium III (or equivalent) 500 MHz Processor
- 512 MB RAM
- 10 GB Hard Disk
- Network Interface Card (NIC)
- VGA adapter and monitor
- CD-ROM Drive
- Keyboard
VMware
DM Fax Server configurations that include Brooktrout SR140 virtual fax board software are now compatible with VMware.
- SR140 SDK 5.1.3 or later (TR1034 is not compatible with VMware at this time)
- ESX Server version 3.0.1 or later within the 3.0.x product line
- Windows 2003 Enterprise Edition, Service Pack 2
- Windows 2003 Standard Edition, Service Pack 2
- Windows 2000, Service Pack 4
- The VMware virtual environment created for SR140 must meet SR140 minimum requirements as well as the minimum processor emulated by VMware, which is the Xeon processor. Therefore, the minimum requirements of the virtual machine presented to SR140 are: Single Xeon - 2 GHz, 512 MB memory. This results in approximately 15% CPU utilization when running 120 simultaneous SR140 faxes.
Server Machine Compatibility
Rack-Mount Servers
- A rack-mount server may be used to host DM Fax Server software and the fax board hardware. If you plan to use a rack-mount server, Imecom recommends a 2U or larger chasse. You may use your preferred server brand, i.e. HP, Dell, Gateway, etc. Our main recommendation is to ensure that your server machine or chasse is capable of housing a full length, 13-inch fax board.
PLEASE NOTE: If you elect to use a riser card, often found in 1U and 2U servers, it is very likely that you will be limited to one Brooktrout fax board per server. Riser cards often create conflicts when multiple Brooktrout fax boards are installed on the same riser card.
Tower Servers
- A tower server may be used to host DM Fax Server software and the fax board hardware. If using a tower server, Imecom recommends using a mid- or full-tower chasse, not a mini-tower chasse. You may use your preferred server brand, i.e. HP, Dell, Gateway, etc. Our main recommendation is to ensure that your server machine or chasse is capable of housing a full length, 13-inch fax board.
Supported Fax Boards
Imecom Group supplies and supports Brooktrout TR1034, TR114, TruFax, and SR140 fax board products from Cantata. If you are currently using or plan to use Brooktrout TR1034 or TR114 series fax boards, note that they are full length 13-inch fax boards. As stated previously, make sure that the server machine designated to host the fax card(s) is large enough to support full length cards.
Click here for a detailed list of supported fax boards.
