Supported IP-PBX and VoIP Gateway Products
The following IP PBX, IP Gateway, and virtual machine products have been tested for compatibility with Imecom DM Fax Server Fax over IP solutions.
Alcatel OmniPCX Enterprise
- SIP, H.323
- Release 7.1 or later
Avaya Communication Manager
- H.323
- Release 3.01 (with update 628.6-11410) or later
Avaya Media Gateway Services (must support T.38)
- H.323
- Firmware 26.31.0 or later
Cisco Unified Communication Manager (Cisco Unified CallManager)
- SIP, H323, and (MGCP via CallManager)
- For H.323 and MGCP: release 4.2.3 or later (within the 4.2.x product line)
- For SIP: release 5.0.4(a) or later (within the 5.0.x product line)
- For H.323, SIP, and MGCP: release 6.0.1 or later (within the 6.0.x product line)
Cisco Integrated Services Router (IOS-based Gateways capable of supporting T.38)
- SIP, H.323, and MGCP (via CallManager)
- IOS version 12.3 or later
Cisco AS Universal Gateway Series (must support T.38)
- SIP, H.323, and MGCP (via CallManager)
- IOS version 12.3 or later
Cisco High Performance Gatekeeper Series (H.323 IOS Gatekeepers)
- H.323
- IOS version 12.3 or later
Dialogic IMG 1010
- SIP, H.323
- Release 10.3.2 or later
Quintum Tenor Series
- SIP, H.323
- Release P104-12-10 or later
VMware Virtual Machine Software
- SR140 SDK 5.1.3 or later (TR1034 is not compatible with VMware at this time)
- ESX Server version 3.0.1 or later within the 3.0.x product line
System Requirements:
- Windows 2003 Enterprise Edition, Service Pack 2
- Windows 2003 Standard Edition, Service Pack 2
- Windows 2000, Service Pack 4
- The VMware virtual environment created for SR140 must meet SR140 minimum requirements as well as the minimum processor emulated by VMware, which is the Xeon processor. Therefore, the minimum requirements of the virtual machine presented to SR140 are: Single Xeon - 2 GHz, 512 MB memory. This results in approximately 15% CPU utilization when running 120 simultaneous SR140 faxes.
Imecom and Dialogic are continually adding IP PBX and T.38 Gateway support. Please make sure to check back on this page for updates.