You Are Here:  

Supported Fax Boards

Features and Benefits

Intelligent fax boards provide significant benefits over class 1, class 2, and fax/data modems.

• On-board microprocessor and memory
• Faster call setup and connection time
• Faster transmission and reception
• Completely secure - "fax only", no data transmission
• Advanced compression
• Increased reliability
• Error Correction Mode (ECM)
• Supports DTMF tone recognition
• Supports DID (Direct Inward Dial)
• Supports DNIS (Dialed Number Identification Service)
• Supports Fax over IP

Virtual IP Fax Boards - T.38/SIP/H.323

Brooktrout SR140 series virtual fax boards are used only in IP telephony environments. SR140 virtual technology requires T.38 and either SIP or H.323 call control protocols. There is no form factor as SR140 is a virtual host-based fax board.

Manufacturer	Model #	Ports	Interfaces	Form Factor
Dialogic Brooktrout	SR140+2F	2	T.38, SIP, H.323	Virtual (License)
Dialogic Brooktrout	SR140+4F	4	T.38, SIP, H.323	Virtual (License)
Dialogic Brooktrout	SR140+8F	8	T.38, SIP, H.323	Virtual (License)
Dialogic Brooktrout	SR140+12F	12	T.38, SIP, H.323	Virtual (License)
Dialogic Brooktrout	SR140+24F	24	T.38, SIP, H.323	Virtual (License)
Dialogic Brooktrout	SR140+30F	30	T.38, SIP, H.323	Virtual (License)
Dialogic Brooktrout	SR140+48F	48	T.38, SIP, H.323	Virtual (License)
Dialogic Brooktrout	SR140+60F	60	T.38, SIP, H.323	Virtual (License)

SR140 and VMware

• SR140 SDK 5.1.3 or later (TR1034 is not compatible with VMware at this time)
• ESX Server version 3.0.1 or later within the 3.0.x product line
• ESXi Server version 4.0.0 or later using Windows

System Requirements:

• Windows Server 2008 Enterprise Edition, Service Pack 1
• Windows Server 2003 Enterprise Edition, Service Pack 2
• Windows Server 2003 Standard Edition, Service Pack 2
• Windows 2000 Server, Service Pack 4
• The VMware virtual environment created for SR140 must meet SR140 minimum requirements as well as the minimum processor emulated by VMware, which is the Xeon processor. Therefore, the minimum requirements of the virtual machine presented to SR140 are: Single Xeon - 2 GHz, 512 MB memory. This results in approximately 15% CPU utilization when running 120 simultaneous SR140 faxes.

Digital Fax Boards - T1/PRI

These fax boards have on-board T1/PRI and IP interfaces. T1/PRI interface supports T1 robbed-bit and T1 PRI ISDN. IP interface supports T.38 and SIP/H.323. Line interface is RJ-48C. Form-factor is PCI-x (includes legacy PCI) and PCIe.

Manufacturer	Model #	Ports	Interfaces	Form Factor
Dialogic Brooktrout	TR1034+P4H-T1-1N-R	4	T1/PRI, IP	PCI/PCI-x
Dialogic Brooktrout	TR1034+P8H-T1-1N-R	8	T1/PRI, IP	PCI/PCI-x
Dialogic Brooktrout	TR1034+P16H-T1-1N-R	16	T1/PRI, IP	PCI/PCI-x
Dialogic Brooktrout	TR1034+P24H-T1-1N-R	24	T1/PRI, IP	PCI/PCI-x
Dialogic Brooktrout	TR1034+E4H-T1-1N-R	4	T1/PRI, IP	PCIe
Dialogic Brooktrout	TR1034+E8H-T1-1N-R	8	T1/PRI, IP	PCIe
Dialogic Brooktrout	TR1034+E16H-T1-1N-R	16	T1/PRI, IP	PCIe
Dialogic Brooktrout	TR1034+E24H-T1-1N-R	24	T1/PRI, IP	PCIe

Digital Fax Boards - E1/PRI

These fax boards are generally used outside the continental United States. These fax boards have on-board E1/PRI and IP interfaces. E1/PRI interface supports E1 PRI ISDN. IP interface supports T.38 and SIP/H.323. Line interface is RJ-48C. Form-factor is PCI-x (includes legacy PCI) and PCIe.

Manufacturer	Model #	Ports	Interfaces	Form Factor
Dialogic Brooktrout	TR1034+P4H-E1-1N-R	4	E1/PRI, IP	PCI/PCI-x
Dialogic Brooktrout	TR1034+P8H-E1-1N-R	8	E1/PRI, IP	PCI/PCI-x
Dialogic Brooktrout	TR1034+P10H-E1-1N-R	10	E1/PRI, IP	PCI/PCI-x
Dialogic Brooktrout	TR1034+P16H-E1-1N-R	16	E1/PRI, IP	PCI/PCI-x
Dialogic Brooktrout	TR1034+P20H-E1-1N-R	20	E1/PRI, IP	PCI/PCI-x
Dialogic Brooktrout	TR1034+P30H-E1-1N-R	30	E1/PRI, IP	PCI/PCI-x
Dialogic Brooktrout	TR1034+E4H-E1-1N-R	4	E1/PRI, IP	PCIe
Dialogic Brooktrout	TR1034+E8H-E1-1N-R	8	E1/PRI, IP	PCIe
Dialogic Brooktrout	TR1034+E10H-E1-1N-R	10	E1/PRI, IP	PCIe
Dialogic Brooktrout	TR1034+E16H-E1-1N-R	16	E1/PRI, IP	PCIe
Dialogic Brooktrout	TR1034+E20H-E1-1N-R	20	E1/PRI, IP	PCIe
Dialogic Brooktrout	TR1034+E30H-E1-1N-R	30	E1/PRI, IP	PCIe

Analog Fax Boards

These fax boards support standard analog (POTS) lines. Line interface is RJ-11. Form-factor is PCI-x (includes legacy PCI) and PCIe.

Manufacturer	Model #	Ports	Interfaces	Form Factor
Dialogic Brooktrout	TR1034+P2L-R (Half-Length)	2	Loop Start	PCI/PCI-x
Dialogic Brooktrout	TR1034+P2L-R	2	Loop Start	PCI/PCI-x
Dialogic Brooktrout	TR1034+P4L-R	4	Loop Start	PCI/PCI-x
Dialogic Brooktrout	TR1034+P8L-R	8	Loop Start	PCI/PCI-x
Dialogic Brooktrout	TR1034+E2L-R (Half-Length)	2	Loop Start	PCIe
Dialogic Brooktrout	TR1034+E2L-R	2	Loop Start	PCIe
Dialogic Brooktrout	TR1034+E4L-R	4	Loop Start	PCIe
Dialogic Brooktrout	TR1034+E8L-R	8	Loop Start	PCIe
Dialogic Brooktrout	TruFax 100-R	1	Loop Start	PCI/PCI-x
Dialogic Brooktrout	TruFax 200-R	2	Loop Start	PCI/PCI-x
Dialogic Brooktrout	TruFax 100E	1	Loop Start	PCIe
Dialogic Brooktrout	TruFax 200E	2	Loop Start	PCIe

Analog/DID Fax Boards

These fax boards support DID over analog service for inbound traffic and standard analog (POTS) lines for outbound traffic. Line interface is RJ-11. Form-factor is PCI-x (includes legacy PCI) and PCIe. On-board -48 vdc DID power supply provides voltage to DID over analog trunk.

Manufacturer	Model #	Ports	Interfaces	Form Factor
Dialogic Brooktrout	TR1034+P2C-R	2	1 Loop Start, 1 DID	PCI/PCI-x
Dialogic Brooktrout	TR1034+P2D-R	2	2 DID	PCI/PCI-x
Dialogic Brooktrout	TR1034+P4C-R	4	2 Loop Start, 2 DID	PCI/PCI-x
Dialogic Brooktrout	TR1034+P4D-R	4	4 DID	PCI/PCI-x
Dialogic Brooktrout	TR1034+E2C-R	2	1 Loop Start, 1 DID	PCIe
Dialogic Brooktrout	TR1034+E2D-R	2	2 DID	PCIe
Dialogic Brooktrout	TR1034+E4C-R	4	2 Loop Start, 2 DID	PCIe
Dialogic Brooktrout	TR1034+E4D-R	4	4 DID	PCIe

• Home
• |
• Products & Solutions
• |
• Downloads
• |
• Customers
• |
• Support
• |
• Company
• |
• Contact
• |
• Site Map